Canon SELPHY CP1300 Drivers Download

Canon SELPHY CP1300 Drivers Download

canon selphy cp1300 review - Canon SELPHY CP1300 Drivers Download

Canon SELPHY CP1300 Drivers Download – Windows clients, Macphun’s across the board photograph manager Luminar 2018 is currently accessible for only $69 for new clients and $49 for overhauling clients. We’ve appraised Luminar as “Exceedingly Recommended”. Visit the Luminar site to attempt it for nothing.

This unique offer keeps running until February 26th and furthermore incorporates 2 E-books from Andrew Gibson: “The Creative Photographer” and “Acing Exposure”, Ultra Violet LUTs by Richard Harrington, Ultra Violet Preset Pack by Richard Harrington, and a Futuristic Preset Pack.


The Canon SELPHY CP1300 is another conservative photograph printer from Canon, which is the successor to the SELPHY CP1200.

It is fit for delivering postcard estimated prints (6×4 inches). Like the CP1200, it is remote, which means you can print from gadgets associated either to your home system, or to the printer specifically. This incorporates PCs, your telephone and your camera.

In the case it accompanies a power supply link, yet you can buy a battery independently so you can utilize it movably without being almost a power point.

Right now, the Canon SELPHY CP1300 retails for around £127/$130. Paper and ink packs for the printer cost around £27 for 108 prints.


Setting up and utilizing the Canon SELPHY CP1300 printer is exceptionally direct, and you can be prepared to go immediately without a doubt.

You can stack the ink tape in the side of the printer, behind an entryway which covers it. It’s truly an instance of sliding it in, confronting the correct way – which ought to be sensibly evident since it won’t fit if it’s confronting the wrong way.

At the front of the printer, you’ll discover the space for the paper tape. This is marginally more convoluted than the ink tape, however sufficiently simple once you get its hang. There are two spreads which should be opened, and the paper put inside it. It can just hold 18 sheets at once – which is conveniently what number of are found in singular packs provided in the 108 sheet pack we were utilizing. The polished side of the paper should be embedded confronting upwards – once you’ve done that, close within cover, however open the external one – this enables you to embed the tape into the pertinent space in the front of the printer.

In case you’re utilizing the provided control link, you connect this to the back of the camera. Then again, append the battery pack – this is accessible to buy independently, and accordingly, we were not given this to test. Once connected to, hold down the power catch on the highest point of the printer.

One of the changes from the CP1200 is the extent of the LCD screen on the highest point of the printer, which like previously, can tilt advances to enable you to see it to better. It is presently 3.2inches – contrasted and 2.7inches. Unfortunately, it’s still not touch-touchy, so you’ll have to make utilization of the catches on the printer to move around the different menu alternatives.

With regards to printing from the Canon SELPHY CP1300, there’s a couple of various alternatives. There’s a SD card opening in the front of the printer, or a USB port as an afterthought, from which you can print straightforwardly. This is awesome on the off chance that you simply need to make a speedy print from your camera.

Once you’ve embedded a SD card, you’ll see the pictures from it showed on the screen. You can utilize the directional keys to travel through the diverse pictures on the card, choosing which ones to print, and changing any settings you wish to.

On the other hand, you can set it up as a remote printer. Most likely the best choice is to set it up so it’s associated with your home Wi-Fi arrange, which will imply that you can print to it from a gadget which is likewise associated with a similar Wi-Fi organize, for example, your PC, your telephone, or to be sure your camera. To set it up in this way, you’ll have to go to the Wi-Fi settings zone, found under the Menu catch. You’ll be guided through the means you have to take after to set it up, which is truly clear as crystal and direct.

On the off chance that you incline toward, you can associate straightforwardly to the Canon SELPHY CP1300 itself to print that way. This is valuable on the off chance that you don’t approach the Wi-Fi switch, or for instance in case you’re utilizing it while out on a shoot and simply need to print something from another gadget – this implies you needn’t bother with a switch or some other gear to utilize it. The CP1300 is good with Apple AirPrint, so on the off chance that you have an iPhone, you can send a picture from it effortlessly to be imprinted on the CP1300.

Group says that postcard prints take around 43 seconds to print. In our tests, we found that altogether from squeezing the print catch on the telephone or PC, to having the picture completed, is a little more than a moment or so – this additional time might be because of the remote association requiring a significant stretch of time to exchange the information, and additionally paper dealing with. Printing specifically from a SD card is faster – more often than not around 50 seconds (counting paper dealing with).

As we said in our CP1200 survey, watching the printing procedure is very entrancing. The printing procedure includes applying the shading in layers independently, implying that the paper will be drawn into the printer, at that point spat out once it’s connected the primary layer, being attracted again three more circumstances previously it’s concluded. You’ll have to guarantee there’s space behind the printer, as it moves forward and backward from the front to the back a few times. You’ll see the screen show which layer it’s printing, and once it’s prepared, the last picture will rest in the paper plate.

On the off chance that you have a memory card or USB stick embedded, you can print every one of the pictures in one go, or you can print more than one to a page – you can fit up to 8 on one page, which can be a good time for making a collection write impact.

Another element for the CP1300 is “Rearrange Print”. This fundamentally implies different cell phones can interface with the printer without a moment’s delay so as to print onto one sheet of paper – which a be a fun route for a family to print their shots.

We were provided with a joined ink and paper pack, which has 108 sheets inside it. At the season of composing, this was accessible to purchase for £26.73 from Amazon. This makes it around 25p for every print, barring the cost of purchasing the printer itself.

As we’ve noted previously, the print itself will highlight two strips on either side which can be organizer over and detached. This is to guarantee that the print goes the distance to the sides, however in the event that you essentially overlap the strips and abandon them appended, you can utilize them as a make-move stand, which means the photograph will stand up on a level surface. That is the review about Canon SELPHY CP1300 Drivers Download. provides IJ Network Device Setup Utility, the software that empowers your PC/Laptop to connect with the printer. In order to use this feature, you need to download the Canon SELPHY CP1300 Drivers Download and do a simple settings such as entering the IP address of the printer or selecting the network frame type.

Download and Installation instruction

  1. Choose Canon SELPHY CP1300 Drivers Download and Download the software file based on your operating system or OS
  2. Open the location where the file is saved
  3. Double-click the downloaded driver file to decompress it, then installation will start automatically.
  4. Follow the instruction given on the screen
  5. When the installation is done successfully, your printer is ready to operate.

How To Setting Canon SELPHY CP1300 Drivers Download Up Wireless Connection on Windows

  1. Press the Menu button on your Canon printer, then select Settings
  2. Select Device Settings
  3. Select LAN settings, then Select Change wireless / wired, then press the OK button.
  4. Select Wireless LAN settings, then press the OK button.
  5. Select WPS configuration on Canon printer, then press the OK button.
  6. Select Push button method then presses the OK button.
  7. Press the OK button.
  8. When the access point is ready, press the OK button on the machine, then press the WPS button on the access point within two minutes.
  9. When the completion screen appears on the LCD of the device, press the OK button. The LAN settings screen returns.
  10. A timeout error occurs if the setup is not completed within two minutes.
  11. The WPS button may be named differently depending on your access point. For details, refer to the manual of your access point.
  12. When this step is finished, that you can print and use canon printer with wireless to print your office or home jobs.

The supported Operating System for Canon SELPHY CP1300 Drivers Download

  • Windows (Windows 10, Windows 10 x64, Windows 8.1, Windows 8.1 x64, Windows 8, Windows 8 x64, Windows 7, Windows 7 x64, Windows Vista, Windows Vista x64)
  • Macintosh (macOS 10.13, macOS v10.12, OS X v10.11, OS X v10.10, OS X v10.9, Mac OS X v10.8)
  • Linux (Linux 32bit, Linux 64bit)

Canon SELPHY CP1300 Drivers Download Links

Windows all versions 32bit
Windows all versions 64bit
OS X 10.9,OS X 10.8
Mac OS X 10.6
Linux (RPM/DEB)

Canon SELPHY CP1300 Drivers Download