Canon imagePROGRAF PRO-4000S Drivers Download

Canon imagePROGRAF PRO-4000S Drivers Download

ipf pro 4000s - Canon imagePROGRAF PRO-4000S Drivers Download

Canon imagePROGRAF PRO-4000S Drivers Download – Martin with the Canon PRO-4000 44″ Printer As I said in a current post, my old vast configuration printer has surrendered the phantom, so I’ve quite recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my sentiment of this new printer.

Canon imagePROGRAF PRO-4000S Drivers Download Printer Review

To get directly to the point, with my old 24″ iPF6350 breaking after only six years, for a couple of moments, I considered moving far from Canon for my substantial configuration printing, yet then I understood that there was another line of vast organization printers that has quite recently been declared, so I chose to investigate, and was exceptionally energized by what I saw.

At first, I was just going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, however despite the fact that this new scope of Canon imagePROGRAF PRO-4000S Drivers Download printers are smaller, they are more than double the tallness, which implies the PRO-2000 can’t be conveyed up to my third floor studio. It essentially won’t fit around the highest point of the stairs, even remained on end.

There was an alternative to have it crane lifted up to the third floor and go in through the window, yet this would cost $1,500, and after that obviously another $1,500 to have it brought down again on the off chance that I move, or when it unavoidably breaks again sooner or later what’s to come.

I assumed if I would spend another $3,000 I should put that cash towards an imagePROGRAF PRO-4000, which is the 44″ wide enormous sibling of the Canon imagePROGRAF PRO-4000S Drivers Download and have that introduced on my second floor rather than up in my studio. What’s more, when I say enormous sibling, I truly do mean BIG, as should be obvious in this photograph of me with the printer subsequent to having it introduced (beneath).


Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various extensive prints on three kinds of Breathing Color media, and I was extremely content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, yet the 2000 and 4000 are essentially indistinguishable aside from the width of move media that can be utilized. This likewise implies this audit will be similarly as valuable on the off chance that you are thinking about the PRO-2000 as it will for the PRO-4000.

Anyway, my Canon imagePROGRAF PRO-4000S Drivers Download touched base on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming more acquainted with this delightful new bigger configuration printer from Canon.

What’s New?

Before we take a gander at a few prints, we should speak a little about what’s new with the PRO-4000. All things considered, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really lessens the quantity of hues from 12 to 11 color inks, yet they included another Chroma Optimizer.

Canon imagePROGRAF PRO-4000S Drivers Download 6 of the 12 Inks

From the Canon site, I see that “LUCIA PRO ink detailing incorporates small scale epitomized colorants that empower smooth slopes, an extended shading extent, and more profound shading articulation.” In numerous ways, I concur with this announcement, yet I’m really not persuaded that the shading range is extended. Actually, for some particular circumstances utilizing matte media I’d the extent has been gotten a bit, however I’ll speak more about this later…

The Chroma Optimizer is utilized when imprinting on reflexive and semi-shiny media, and goes about as a reasonable coat, enhancing shading and advances the dull zones of gleam prints. The new inks and Chroma Optimizer are likewise said to enhance scratch protection and diminish graininess. We’ll investigate some real prints in a matter of seconds.

I was additionally upbeat to find that the dark line that was constantly left on the correct underside of the prints is not any more an issue. That is something that pester the hellfire out of my about my iPF6350 and I realize this was not settled the 6450, so it’s decent this is at long last settled.

Just a single Print Head

While my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and hostile to obstructing innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, expecting that you’d change the two heads on the old models obviously. Having recently the one head likewise empowered Canon to make the printer smaller in width, which is a decent space saver.

Standard PF-10 Print Head for the PRO-4000

Having quite recently the one print head likewise empowered Canon to accelerate the printing impressively. A 18 x 24 inch print on my old printer used to take around 9 minutes, yet with the new PRO-4000 a similar size print takes estimated 3 minutes 40 seconds.

New Media Loading Mechanism

The media stacking instrument has additionally been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (beneath). In the wake of dropping the media on its holder into put, you turn the move holder which manages the media up into the printer, until the point when you hear a beep, to tell you that the printer would now be able to bolster the media.

Professional 4000 with Top Cover and Output Guide Open

At that point, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and nourish the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we likewise now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

This is an advantage since it implies that clean is more averse to settle on the print side of the media as you print, and tidy that is as of now on the media, will probably tumble off, before it’s imprinted on. On the off chance that you print on tidy, the clean for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again sans preparation.

Media Information Update

Another exceptionally pleasant touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Previously, on the off chance that I included a custom media compose, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media once

Refresh Media Information

Presently, you can simply go to the printer drivers and open up the Printer Utilities, and select Media Information from the pulldown, and tap the catch to refresh the media. This at that point goes to the printer and analyzes the media data on the printer, and if it’s distinctive to the media that the printer drivers think about, it will refresh this data for you. It’s extremely smooth, and an exceptionally welcome element.

Wifi and Gigabit Ethernet Connectivity

The PRO arrangement of printers now likewise bolsters Wifi Connectivity and the wired system interface is currently Gigabit Ethernet. We can likewise still associate with the printer with USB. You would now be able to print PDF and JPEG archives straightforwardly from a memory stick too.

I have now printed with Wifi, LAN and USB, and observed Wifi to be a little on the moderate side for a nice estimated print, so I purchased a 10 meter USB link so I can print from my feasting table, which truly speeded things up. Despite the fact that it’s just High Speed USB2, it’s substantially quicker than Wifi.

I likewise really purchased a 20m Ethernet link, with the goal that I can connect the PRO-4000 straightforwardly to my switch on the 3F in the event that I have to complete a ton of work from the studio. With USB being so quick, I don’t know I’ll do this frequently, yet I at any rate now have the choice.

Three Sizes of Ink Tanks

Another awesome change as I would like to think is the capacity to now look over three sizes of ink tanks, with 160ml, 330ml, and 700ml tanks accessible. My old iPF6350 took 130ml ink tanks, so even the littlest of the new tanks holds 30ml more ink. I could top off the new PRO-4000 with 160ml tanks, however now having the choice to introduce bigger tanks, and blend and match the sizes, implies we can choose the tank estimate in light of how rapidly the inks rundown.

The PRO-4000 accompanies an arrangement of ink cartridges holding 190ml. Before we introduced the cartridges into the printer, I took this photo for examination (underneath). On the left is a 190ml cartridge, and on the privilege is a 700ml. That is the review about Canon imagePROGRAF PRO-4000S Drivers Download. provides IJ Network Device Setup Utility, the software that empowers your PC/Laptop to connect with the printer. In order to use this feature, you need to download the Canon imagePROGRAF PRO-4000S Drivers Download and do a simple settings such as entering the IP address of the printer or selecting the network frame type.

Download and Installation instruction

  1. Choose Canon imagePROGRAF PRO-4000S Drivers Download and Download the software file based on your operating system or OS
  2. Open the location where the file is saved
  3. Double-click the downloaded driver file to decompress it, then installation will start automatically.
  4. Follow the instruction given on the screen
  5. When the installation is done successfully, your printer is ready to operate.

How To Setting Canon imagePROGRAF PRO-4000S Drivers Download Up Wireless Connection on Windows

  1. Press the Menu button on your Canon printer, then select Settings
  2. Select Device Settings
  3. Select LAN settings, then Select Change wireless / wired, then press the OK button.
  4. Select Wireless LAN settings, then press the OK button.
  5. Select WPS configuration on Canon printer, then press the OK button.
  6. Select Push button method then presses the OK button.
  7. Press the OK button.
  8. When the access point is ready, press the OK button on the machine, then press the WPS button on the access point within two minutes.
  9. When the completion screen appears on the LCD of the device, press the OK button. The LAN settings screen returns.
  10. A timeout error occurs if the setup is not completed within two minutes.
  11. The WPS button may be named differently depending on your access point. For details, refer to the manual of your access point.
  12. When this step is finished, that you can print and use canon printer with wireless to print your office or home jobs.

The supported Operating System for Canon imagePROGRAF PRO-4000S Drivers Download

  • Windows (Windows 10, Windows 10 x64, Windows 8.1, Windows 8.1 x64, Windows 8, Windows 8 x64, Windows 7, Windows 7 x64, Windows Vista, Windows Vista x64)
  • Macintosh (macOS 10.13, macOS v10.12, OS X v10.11, OS X v10.10, OS X v10.9, Mac OS X v10.8)
  • Linux (Linux 32bit, Linux 64bit)

Canon imagePROGRAF PRO-4000S Drivers Download Links

Windows all versions 32bit
Windows all versions 64bit
OS X 10.9,OS X 10.8
Mac OS X 10.6
Linux (RPM/DEB)

Canon imagePROGRAF PRO-4000S Drivers Download