Canon imagePROGRAF iPF6300 Driver Download

Canon imagePROGRAF iPF6300 Driver Download

canon ipf6300 review - Canon imagePROGRAF iPF6300 Driver Download

Canon imagePROGRAF iPF6300 Driver Download – Ordinance iPF6300 audit Utilizing the imagePROGRAF iPF6300 24 inch vast configuration printer Ordinance UK as of late loaned us an iPF6300 expansive configuration printer. This is their most up to date 24″ wide printer and supersedes the iPF6100 that we assessed a year ago.

Article Index Canon imagePROGRAF iPF6300 Driver Download

  • What do you get?
  • Paper Handling
  • Utilizing the iPF6300
  • Some all encompassing prints
  • Ink change | Software
  • Profiling | Prints
  • Highly contrasting
  • Conclusions
  • Rundown
  • Determinations
  • More data/assets

Canon imagePROGRAF iPF6300 Driver Download

Keith has been dragging the 6300 through hellfire, taking a gander at how it’s not quite the same as the past model and how it tolls for somebody hoping to climb from an A3+ work area printer. As a picture taker and artistic work printer, Keith is focusing more on these parts of its utilization as opposed to creation or sealing employments.

Standard iPF6300

  • print for collectionThis survey covers this 24″ width printer.
  • The iPF6350 is a 6300 printer with a 80 GB inside hard circle.
  • For a bigger 44″ print width adaptation you would need to take a gander at the iPF8300.
  • The audit was done driving the printer from OSX Apple Macs.

In any case, the usefulness and programming is fundamentally the same as in the event that you happen to utilize a Windows PC.

What do you get with the Canon imagePROGRAF iPF6300 Driver Download

You do require more than a work area to put it on.

The photograph demonstrates me holding a highly contrasting print, created on 240g Canon Satin paper.

Standard show a portion of the key highlights of this printer as:

LUCIA EX Ink Set

Media Configuration Tool

High-Precision Print Modes

Worked in Calibration

Print Plug-in for Adobe Photoshop

Updated Control Panel

I’ll take a gander at these in more detail amid the survey.

New Inks

The arrangement of hued inks (LUCIA EX shade ink) is gone for giving a more extensive extent of hues on a scope of papers, contrasted and past adaptations. I’ll take a gander at a few parts of this while talking about a portion of the prints I created.

The inks are:

  • PFI-105MBK Matte dark
  • PFI-105BK Photo dark
  • PFI-105PC Pale cyan
  • PFI-105C Cyan
  • PFI-105PM Pale maroon
  • PFI-105M Magenta
  • PFI-105Y Yellow
  • PFI-105R Red
  • PFI-105G Green
  • PFI-105B Blue
  • PFI-105GY Gray
  • PFI-105PGY Pale dim

printer fits in the back of an auto

There are two dark inks for ‘Photograph’ and ‘Matte’ media – these are for all time stacked, and there is no compelling reason to swap or change dark ink settings, this is set by the media decision when printing.

Our printer touched base on the rearward sitting arrangement of a VW Golf and was completely set up in under 15 minutes…

The legs and stand jolt together, alongside the overlay out print catcher you can see by my feet in the photograph above.

Since the printer arrived completely working, I can’t remark on the transportation design, get the job done to state that you will require two individuals to set things up.

The print heads will require introducing for first utilize – these simply fit set up, since they are client replaceable units (despite the fact that the should keep going for some liters of ink).

Note – we now have an iPF8300 here at Northlight, so I’ve reviewed a more definite take a gander at establishment on our iPF8300 data page.

Printer Connectivity

  • There is a decision of USB2 or Ethernet to interface your printer up to a PC.
  • I connected the printer to our Gigabit Ethernet arrange and the printer got itself an IP address from our DHCP server, with no extra information.
  • The printer additionally recognizes itself by means of the Bonjour conventions, so it showed up naturally on all our arranged PCs.
  • The printer has a worked in web server which I found the address for, by means of the front board show.
  • The iPF6300 that I’m taking a gander at, does not have the inside hard circle of the iPF6350 and more extensive iPF8300.
  • This implies you can’t reproduce occupations from plate and adds a few breaking points to work detailing. I’ll cover this in more detail when taking a gander at the printer’s related programming, to a limited extent 2.
  • Paper Loading and Media taking care of
  • The printer takes both roll and sheet media at the back, and thicker sheets at the front
  • Move your mouse over the picture to see the sheet stack underpins.
  • Move media is situated behind this (mouse over picture to see).
  • The shaft has connectors for 2″ and 3″ center rolls.
  • move paper shafts
  • The shaft is mechanized, and encouraging in the main edge of the paper makes it be pulled through the printer and tried for arrangement.
  • Mouse over picture underneath to see stacking.

I misaligned one of the end plates by a couple of mm and the printer halted part of the way through stacking and asked for I re-adjust the paper and attempt once more.

Littler rolls, for example, the 17″ canvas beneath, are stacked fine and dandy, with the printer demonstrating the identified width.

17 inch come in 24 inch printer

Paper write is set by means of the printer front board.

The menu framework is clear, and I had no trouble finding what was there – it has been cleaned up to some degree from the iPF6100. This is great, since there are many paper writes and assortments to look over.

front board – paper compose

as of late utilized paper typesFortunately you can utilize the media setup apparatus programming to strip out all the stuff you are never going to utilize – this product has various capacities and I’ll take a gander at it advance when covering custom media settings.

The three most as of late utilized paper composes are recognized as ‘brisk select’ alternatives, which is certainly convenient.

For additional thick media, there is a front nourish way, yet all different sheets are encouraged in the best.

On the off chance that you are encouraging thick media through the front, you ought to guarantee that there is sufficient space at the back of the printer.

Regardless I have blemishes on the divider from a past printer test where I overlooked this.

The sheet loader was extensively more precise than when I utilized the iPF6100 a year ago, with no self-evident ‘grab’ checks along the edge of paper and not one misfed sheet.

Note this was a really new machine and the one I took a gander finally year most certainly a very much utilized demo show, however the distinctions were discernible.

The photo underneath demonstrates a sheet sustained in and prepared to print.

The two prints are of my high contrast test print and show how you should be watchful when setting edges for sheet media.

setting right edges for printing

Both are a similar picture, however in the event that you look painstakingly you can see that the left imprint has been cut at either end.

The paper is a Canon cotton cloth paper and I wouldn’t have any desire to foul up an excessive number of sheets this way.

Borderless printing is bolstered at specific media sizes. The moved up picture beneath was printed borderless on 17″ canvas.

Programmed cutting is (as a matter of course) debilitated for a few media composes, so my enormous scissors are required.

move paper – borderless printing

The print beneath was printed with vast outskirts on a similar medium.

I’ve been doing a few trials with the JetMaster canvas mounting framework. This is shrouded in its own particular JetMaster audit.

reflexive canvas print

shading test prints on iPF6300The standard edge width is 3mm (prints to one side), however as I discovered a few times, it pays to twofold check in the event that you are experimenting with another media estimate.

A great deal of my printing does not by any means push the extremes of extent, so halfway to run with some of my trial of the canvas mounting framework, I took some nearby photographs of different blossoms from the garden and studio.

The reds of the desert flora blossoms were to a great extent past the scope of the sRGB shading space and in parts went past the scope of Adobe98.

The majority of the shots were taken in our item photography region, and utilized the TS-E 90mm tilt/move focal point with different augmentation tubes on a Canon 1Ds Mk3 camera.

The prints underneath were settled together with the ImageNest format programming, however printed by means of the typical Canon printer driver.

paper take up frontpaper take up, collapsed

Utilizing the Canon iPF6300

In the event that, similar to me, you create a great deal of your printed work in Photoshop, at that point there are two approaches to print from it.

One is to utilize the standard Photoshop print discourse, the other is to print by means of Canon’s Photoshop print module.

To start with up, the ordinary PS print system.

The screen shots here are all from our Apple Macs, however usefulness is basically the same on Windows PCs

In this first illustration, I’m printing a profiling focus on A3 paper, with the goal that it can be estimated to make an ICC profile for the paper. I’ve set the Photoshop (CS3) print discourse to ‘no shading administration’ and the driver to ‘seller coordinating’.

‘Merchant Matching’ viably signifies ‘abandon it to the driver’, so I would then be able to set the driver to ‘no shading administration’ and realize that the objective will be printed as-may be.

Note that I’m printing from CS3 here, since CS5 right now has no real way to kill shading administration (Adobe article)

printer settings in driver

I can print this to move paper instead of an A3 sheet.

The printer exchange is truly clear about how the A3 print territory will be organized on the paper, however there are many alternatives, so be set up for a couple of amazements.

With any extensive configuration printer I generally jump at the chance to attempt a couple of print designs first on less expensive paper, as opposed to make a plunge with my best quality papers.

print design alternatives

Those check boxes collaborate as well, so I truly would recommend taking a brief time to peruse the manual that you can introduce in the meantime as the printer driver programming.

The ‘free design’ put away pops another window that demonstrates your print, as it would be situated on the paper. You can then ‘print’ another picture with this crate checked and it is added to the format box.

In the case underneath, I’ve printed one picture from Photoshop and another from Preview – the general picture watcher on the Mac.

To the applications, the print has been done, yet the print information is being held to enable you to orchestrate yield, before real printing happens.

free design instrument

This is gr That is the review about Canon imagePROGRAF iPF6300 Driver Download.

ijsetupcanondriver.com provides IJ Network Device Setup Utility, the software that empowers your PC/Laptop to connect with the printer. In order to use this feature, you need to download the Canon imagePROGRAF iPF6300 Driver Download and do a simple settings such as entering the IP address of the printer or selecting the network frame type.

Download and Installation instruction

  1. Choose Canon imagePROGRAF iPF6300 Driver Download and Download the software file based on your operating system or OS
  2. Open the location where the file is saved
  3. Double-click the downloaded driver file to decompress it, then installation will start automatically.
  4. Follow the instruction given on the screen
  5. When the installation is done successfully, your printer is ready to operate.

How To Setting Canon imagePROGRAF iPF6300 Driver Download Up Wireless Connection on Windows

  1. Press the Menu button on your Canon printer, then select Settings
  2. Select Device Settings
  3. Select LAN settings, then Select Change wireless / wired, then press the OK button.
  4. Select Wireless LAN settings, then press the OK button.
  5. Select WPS configuration on Canon printer, then press the OK button.
  6. Select Push button method then presses the OK button.
  7. Press the OK button.
  8. When the access point is ready, press the OK button on the machine, then press the WPS button on the access point within two minutes.
  9. When the completion screen appears on the LCD of the device, press the OK button. The LAN settings screen returns.
  10. A timeout error occurs if the setup is not completed within two minutes.
  11. The WPS button may be named differently depending on your access point. For details, refer to the manual of your access point.
  12. When this step is finished, that you can print and use canon printer with wireless to print your office or home jobs.

The supported Operating System for Canon imagePROGRAF iPF6300 Driver Download

  • Windows (Windows 10, Windows 10 x64, Windows 8.1, Windows 8.1 x64, Windows 8, Windows 8 x64, Windows 7, Windows 7 x64, Windows Vista, Windows Vista x64)
  • Macintosh (macOS 10.13, macOS v10.12, OS X v10.11, OS X v10.10, OS X v10.9, Mac OS X v10.8)
  • Linux (Linux 32bit, Linux 64bit)

Canon imagePROGRAF iPF6300 Driver Download Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit
Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6
Download
Category
Linux (RPM/DEB)

Canon imagePROGRAF iPF6300 Driver Download